A Guide to Cleaning and Caring for Hotel Bedding and Towels
Release time:
May 19,2026
A Guide to Cleaning and Caring for Hotel Bedding and Towels (Temperature, Bleaching, and Storage)
In hotel operations, bedding and towel consumption often accounts for a significant portion of operating costs. Improper cleaning methods, improper storage, or excessive use of bleach can accelerate linen wear and tear. Mastering scientific cleaning and maintenance procedures not only prolongs the lifespan of linens but also reduces long-term replacement costs. The following summarizes the most common issues and best practices encountered in daily hotel operations.

Bedding and Towel Washing Temperature and Method
Bedding and towel fibers are mostly made of cotton or blends, requiring careful attention to ensuring cleanliness and sterilization while minimizing fiber damage. Common recommendations are as follows:
| Linen Type | Recommended Washing Temperature | Notes |
| Sheets/Duvet Covers | 40–60°C | 40°C for daily washing; 60°C for deep disinfection or during periods of high occupancy |
| Pillowcase | 40–60°C | For heavy soiling, increase the temperature briefly |
| Towels | Around 60°C | To ensure sterilization; avoid temperatures exceeding 70°C to prevent the cotton fibers from becoming stiff. |
| Colored bedding | ≤40°C | To prevent fading, wash separately. |
Tip: Avoid prolonged high-temperature soaking, as this will shrink the linens and weaken the fibers.
Towel Delinting and the Necessity of Multiple Rinsing
New towels tend to shed lint during initial use; this is normal due to residual fiber. Hotels recommend rinsing and drying them separately two or three times before use to minimize lint loss and improve absorbency.
In addition, regularly "dry-washing" towels (using only water and a small amount of detergent, without mixing with other linens) helps remove lint and residual impurities.

Precautions for Using Bleach and Fluorescent Agents
Many hotels overuse bleach or fluorescent brighteners in pursuit of a "snow-white" effect, but this can significantly shorten the lifespan of linens. Recommended guidelines are as follows:
Bleach (chlorine bleach/oxygen bleach): Use only when necessary and in low concentrations, avoiding high temperatures. Chlorine bleach can easily cause fiber yellowing and breakage.
Fluorescent brighteners: While they can temporarily brighten linens, long-term residue can make fabrics brittle and may cause skin allergies.
Alternatives: Oxygen bleach or a specialized fabric disinfectant is recommended, as they maintain whiteness and slow fiber loss.
Storage and Moisture-Proofing: Avoiding Secondary Contamination
Washing and drying are only the first step. Improper storage can also damage linens and breed bacteria. Hotel staff should pay attention to the following key points:
Dry Storage: Maintain a suitable warehouse temperature and humidity below 60% to prevent mold.
Classified Storage: Sheets, pillowcases, and towels should be stored separately to avoid cross-contamination.
First-in-first-out (FIFO) principle: Laundry items are released first to avoid long-term storage and fiber hardening.
Transportation: Clean and dirty linens must be transported separately to reduce the risk of cross-contamination.
Determining Linen Wear and Recommended Replacement Cycles
Even with proper care, linens still have a natural lifespan. Hotels can determine when they need replacement by:
Bedding: Damage, persistent yellowing, significant shrinkage, or pilling.
Towels: Loss of softness, significant decrease in absorbency, and frayed edges.
Typical replacement cycles (for reference only):
Bedsheets/Pillowcases: Approximately 200–250 washes are needed.
Duvet covers: Approximately 150–200 washes.
Towels: Approximately 120–150 washes.
Bath towels/Bath sheets: Approximately 100–120 washes.
Regular inventory and prioritization (e.g., repurposing used linens for cleaning or staff dormitories) can further extend their useful life.

Summary: Best Practices for Reducing Operating Costs.
Wash according to recommended temperatures, avoiding excessively high temperatures and prolonged soaking.
Pre-wash new towels multiple times to reduce linting and enhance the guest experience.
Use bleach and fluorescent agents with caution, opting for milder alternatives.
Dry, compartmentalize, and store in a first-in, first-out manner to avoid secondary contamination.
Set a linen replacement cycle and prioritize usage.
Maintaining hotel linens isn't just about cleanliness; it also directly impacts the guest experience and long-term operating costs. By implementing scientific cleaning and maintenance protocols, hotels can ensure service quality while significantly reducing linen loss and replacement costs.













